SM2135 LED driver

Component/Hub

The SM2135 component represents a SM2135 LED driver chain (SM2135 description, SM2135 description) in ESPHome. Communication is done with two GPIO pins (MOSI and SCLK). It is used in some smart light bulbs:

  • Calex Smart RGB Reflector LED lamp (GU10)

  • LSC Smart GU10

To use the channels of this components, you first need to setup the global sm2135 hub and give it an id, and then define the individual output channels.

# Example configuration entry
sm2135:
  data_pin: GPIOXX
  clock_pin: GPIOXX

Configuration variables:

  • data_pin (Required, Pin Schema): The pin used for MOSI.

  • clock_pin (Required, Pin Schema): The pin which SCLK is connected to.

  • id (Optional, ID): The id to use for this sm2135 component. Use this if you have multiple SM2135 chains connected at the same time.

  • cw_current (Optional, current): The current used for the white channel. Defaults to 10mA. Can be one of 10mA, 15mA, 20mA, 25mA, 30mA, 35mA, 40mA, 45mA, 50mA, 55mA, 60mA.

  • rgb_current (Optional, current): The current used for the RGB channel. Defaults to 20mA. Can be one of 10mA, 15mA, 20mA, 25mA, 30mA, 35mA, 40mA, 45mA.

  • separate_modes (Optional, bool): Use separate RGB/CW modes instead of writing all 5 values as RGB. Defaults to true, keep it at true if your SM2135 chip variant does not support simultaneous CW and RGB modes (e.g. SM2135E). Set this to false when your SM2135 chip variant supports having CW and RGB leds on at the same time (e.g. SM2135EH/SM2135EJ).

Output

The SM2135 output component exposes a SM2135 channel of a global Component/Hub as a float output.

# Individual outputs
output:
  - platform: sm2135
    id: output_red
    channel: 0
    max_power: 0.8
  - platform: sm2135
    id: output_green
    channel: 1
    max_power: 0.8
  - platform: sm2135
    id: output_blue
    channel: 2
    max_power: 0.8
  - platform: sm2135
    id: output_white
    channel: 3
    max_power: 0.8
  - platform: sm2135
    id: output_warmwhite
    channel: 4
    max_power: 0.8

Configuration variables:

  • id (Required, ID): The id to use for this output component.

  • channel (Required, int): Chose the channel of the SM2135 chain of this output component.

  • sm2135_id (Optional, ID): Manually specify the ID of the Component/Hub. Use this if you have multiple SM2135 chains you want to use at the same time.

  • All other options from Output.

Note

The white LEDs are much brighter than the color LEDs. To get uniform brightness for both color and white you will need to limit the white led power.

Warning

Setting to high currents (either RGB, CW or both) could damage your bulb.

Note

This driver does not support enabling of both the color and the white channels at the same time. Therefore, the Color Interlock should be set to true when using this driver.

See Also