#include <ledc_output.h>

Inheritance diagram for esphome::ledc::LEDCOutput:

Public Member Functions
	LEDCOutput (InternalGPIOPin *pin)

void	set_channel (uint8_t channel)

void	set_frequency (float frequency)

void	set_phase_angle (float angle)

void	update_frequency (float frequency) override
	Dynamically change frequency at runtime. More...

void	setup () override
	Setup LEDC. More...

void	dump_config () override

float	get_setup_priority () const override
	HARDWARE setup priority. More...

void	write_state (float state) override
	Override FloatOutput's write_state. More...

Public Member Functions inherited from esphome::output::FloatOutput
void	set_max_power (float max_power)
	Set the maximum power output of this component. More...

void	set_min_power (float min_power)
	Set the minimum power output of this component. More...

void	set_zero_means_zero (bool zero_means_zero)
	Sets this output to ignore min_power for a 0 state. More...

void	set_level (float state)
	Set the level of this float output, this is called from the front-end. More...

float	get_max_power () const
	Get the maximum power output. More...

float	get_min_power () const
	Get the minimum power output. More...

Public Member Functions inherited from esphome::output::BinaryOutput
void	set_inverted (bool inverted)
	Set the inversion state of this binary output. More...

void	set_power_supply (power_supply::PowerSupply *power_supply)
	Use this to connect up a power supply to this output. More...

virtual void	set_state (bool state)
	Enable or disable this binary output. More...

virtual void	turn_on ()
	Enable this binary output. More...

virtual void	turn_off ()
	Disable this binary output. More...

bool	is_inverted () const
	Return whether this binary output is inverted. More...

Public Member Functions inherited from esphome::Component
virtual void	loop ()
	This method will be called repeatedly. More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed ()

bool	is_ready ()

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Protected Attributes
InternalGPIOPin *	pin_

uint8_t	channel_ {}

uint8_t	bit_depth_ {}

float	phase_angle_ {0.0f}

float	frequency_ {}

float	duty_ {0.0f}

bool	initialized_ = false

Protected Attributes inherited from esphome::output::FloatOutput
float	max_power_ {1.0f}

float	min_power_ {0.0f}

bool	zero_means_zero_

Protected Attributes inherited from esphome::output::BinaryOutput
bool	inverted_ {false}

power_supply::PowerSupplyRequester	power_ {}

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Additional Inherited Members
Protected Member Functions inherited from esphome::output::FloatOutput
void	write_state (bool state) override
	Implement BinarySensor's write_enabled; this should never be called. More...

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Detailed Description

Definition at line 16 of file ledc_output.h.

Constructor & Destructor Documentation

◆ LEDCOutput()

esphome::ledc::LEDCOutput::LEDCOutput ( InternalGPIOPin * pin )

inlineexplicit

Definition at line 18 of file ledc_output.h.

Member Function Documentation

◆ dump_config()

void esphome::ledc::LEDCOutput::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 172 of file ledc_output.cpp.

◆ get_setup_priority()

float esphome::ledc::LEDCOutput::get_setup_priority ( ) const

inlineoverridevirtual

HARDWARE setup priority.

Reimplemented from esphome::Component.

Definition at line 30 of file ledc_output.h.

◆ set_channel()

void esphome::ledc::LEDCOutput::set_channel ( uint8_t channel )

inline

Definition at line 20 of file ledc_output.h.

◆ set_frequency()

void esphome::ledc::LEDCOutput::set_frequency ( float frequency )

inline

Definition at line 21 of file ledc_output.h.

◆ set_phase_angle()

void esphome::ledc::LEDCOutput::set_phase_angle ( float angle )

inline

Definition at line 22 of file ledc_output.h.

◆ setup()

void esphome::ledc::LEDCOutput::setup ( )

overridevirtual

Setup LEDC.

Reimplemented from esphome::Component.

Definition at line 132 of file ledc_output.cpp.

◆ update_frequency()

void esphome::ledc::LEDCOutput::update_frequency ( float frequency )

overridevirtual

Dynamically change frequency at runtime.

Reimplemented from esphome::output::FloatOutput.

Definition at line 192 of file ledc_output.cpp.

◆ write_state()

void esphome::ledc::LEDCOutput::write_state ( float state )

overridevirtual

Override FloatOutput's write_state.

Implements esphome::output::FloatOutput.

Definition at line 105 of file ledc_output.cpp.

Field Documentation

◆ bit_depth_

uint8_t esphome::ledc::LEDCOutput::bit_depth_ {}

protected

Definition at line 38 of file ledc_output.h.

◆ channel_

uint8_t esphome::ledc::LEDCOutput::channel_ {}

protected

Definition at line 37 of file ledc_output.h.

◆ duty_

float esphome::ledc::LEDCOutput::duty_ {0.0f}

protected

Definition at line 41 of file ledc_output.h.

◆ frequency_

float esphome::ledc::LEDCOutput::frequency_ {}

protected

Definition at line 40 of file ledc_output.h.

◆ initialized_

bool esphome::ledc::LEDCOutput::initialized_ = false

protected

Definition at line 42 of file ledc_output.h.

◆ phase_angle_

float esphome::ledc::LEDCOutput::phase_angle_ {0.0f}

protected

Definition at line 39 of file ledc_output.h.

◆ pin_

InternalGPIOPin* esphome::ledc::LEDCOutput::pin_

protected

Definition at line 36 of file ledc_output.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/ledc/ledc_output.h
/opt/build/esphome/esphome/components/ledc/ledc_output.cpp

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ LEDCOutput()

Member Function Documentation

◆ dump_config()

◆ get_setup_priority()

◆ set_channel()

◆ set_frequency()

◆ set_phase_angle()

◆ setup()

◆ update_frequency()

◆ write_state()

Field Documentation

◆ bit_depth_

◆ channel_

◆ duty_

◆ frequency_

◆ initialized_

◆ phase_angle_

◆ pin_