ESPHome  2024.3.1
Public Member Functions | Protected Member Functions | Protected Attributes
esphome::mcp23016::MCP23016 Class Reference

#include <mcp23016.h>

Inheritance diagram for esphome::mcp23016::MCP23016:
esphome::Component esphome::i2c::I2CDevice

Public Member Functions

 MCP23016 ()=default
 
void setup () override
 
bool digital_read (uint8_t pin)
 
void digital_write (uint8_t pin, bool value)
 
void pin_mode (uint8_t pin, gpio::Flags flags)
 
float get_setup_priority () const override
 
- Public Member Functions inherited from esphome::Component
virtual void loop ()
 This method will be called repeatedly. More...
 
virtual void dump_config ()
 
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed ()
 
bool is_ready ()
 
virtual bool can_proceed ()
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 
- Public Member Functions inherited from esphome::i2c::I2CDevice
 I2CDevice ()=default
 we use the C++ default constructor More...
 
void set_i2c_address (uint8_t address)
 We store the address of the device on the bus. More...
 
void set_i2c_bus (I2CBus *bus)
 we store the pointer to the I2CBus to use More...
 
I2CRegister reg (uint8_t a_register)
 calls the I2CRegister constructor More...
 
I2CRegister16 reg16 (uint16_t a_register)
 calls the I2CRegister16 constructor More...
 
ErrorCode read (uint8_t *data, size_t len)
 reads an array of bytes from the device using an I2CBus More...
 
ErrorCode read_register (uint8_t a_register, uint8_t *data, size_t len, bool stop=true)
 reads an array of bytes from a specific register in the I²C device More...
 
ErrorCode read_register16 (uint16_t a_register, uint8_t *data, size_t len, bool stop=true)
 reads an array of bytes from a specific register in the I²C device More...
 
ErrorCode write (const uint8_t *data, size_t len, bool stop=true)
 writes an array of bytes to a device using an I2CBus More...
 
ErrorCode write_register (uint8_t a_register, const uint8_t *data, size_t len, bool stop=true)
 writes an array of bytes to a specific register in the I²C device More...
 
ErrorCode write_register16 (uint16_t a_register, const uint8_t *data, size_t len, bool stop=true)
 write an array of bytes to a specific register in the I²C device More...
 
bool read_bytes (uint8_t a_register, uint8_t *data, uint8_t len)
 Compat APIs All methods below have been added for compatibility reasons. More...
 
bool read_bytes_raw (uint8_t *data, uint8_t len)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_bytes (uint8_t a_register)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_bytes_raw ()
 
bool read_bytes_16 (uint8_t a_register, uint16_t *data, uint8_t len)
 
bool read_byte (uint8_t a_register, uint8_t *data, bool stop=true)
 
optional< uint8_t > read_byte (uint8_t a_register)
 
bool read_byte_16 (uint8_t a_register, uint16_t *data)
 
bool write_bytes (uint8_t a_register, const uint8_t *data, uint8_t len, bool stop=true)
 
bool write_bytes (uint8_t a_register, const std::vector< uint8_t > &data)
 
template<size_t N>
bool write_bytes (uint8_t a_register, const std::array< uint8_t, N > &data)
 
bool write_bytes_16 (uint8_t a_register, const uint16_t *data, uint8_t len)
 
bool write_byte (uint8_t a_register, uint8_t data, bool stop=true)
 
bool write_byte_16 (uint8_t a_register, uint16_t data)
 

Protected Member Functions

bool read_reg_ (uint8_t reg, uint8_t *value)
 
bool write_reg_ (uint8_t reg, uint8_t value)
 
void update_reg_ (uint8_t pin, bool pin_value, uint8_t reg_a)
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_setup ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 

Protected Attributes

uint8_t olat_0_ {0x00}
 
uint8_t olat_1_ {0x00}
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 
- Protected Attributes inherited from esphome::i2c::I2CDevice
uint8_t address_ {0x00}
 store the address of the device on the bus More...
 
I2CBusbus_ {nullptr}
 pointer to I2CBus instance More...
 

Detailed Description

Definition at line 27 of file mcp23016.h.

Constructor & Destructor Documentation

◆ MCP23016()

esphome::mcp23016::MCP23016::MCP23016 ( )
default

Member Function Documentation

◆ digital_read()

bool esphome::mcp23016::MCP23016::digital_read ( uint8_t  pin)

Definition at line 26 of file mcp23016.cpp.

◆ digital_write()

void esphome::mcp23016::MCP23016::digital_write ( uint8_t  pin,
bool  value 
)

Definition at line 33 of file mcp23016.cpp.

◆ get_setup_priority()

float esphome::mcp23016::MCP23016::get_setup_priority ( ) const
overridevirtual

Reimplemented from esphome::Component.

Definition at line 45 of file mcp23016.cpp.

◆ pin_mode()

void esphome::mcp23016::MCP23016::pin_mode ( uint8_t  pin,
gpio::Flags  flags 
)

Definition at line 37 of file mcp23016.cpp.

◆ read_reg_()

bool esphome::mcp23016::MCP23016::read_reg_ ( uint8_t  reg,
uint8_t *  value 
)
protected

Definition at line 46 of file mcp23016.cpp.

◆ setup()

void esphome::mcp23016::MCP23016::setup ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 10 of file mcp23016.cpp.

◆ update_reg_()

void esphome::mcp23016::MCP23016::update_reg_ ( uint8_t  pin,
bool  pin_value,
uint8_t  reg_a 
)
protected

Definition at line 58 of file mcp23016.cpp.

◆ write_reg_()

bool esphome::mcp23016::MCP23016::write_reg_ ( uint8_t  reg,
uint8_t  value 
)
protected

Definition at line 52 of file mcp23016.cpp.

Field Documentation

◆ olat_0_

uint8_t esphome::mcp23016::MCP23016::olat_0_ {0x00}
protected

Definition at line 47 of file mcp23016.h.

◆ olat_1_

uint8_t esphome::mcp23016::MCP23016::olat_1_ {0x00}
protected

Definition at line 48 of file mcp23016.h.


The documentation for this class was generated from the following files: