ESPHome  2024.3.1
Public Member Functions | Protected Member Functions | Protected Attributes
esphome::sx1509::SX1509Component Class Reference

#include <sx1509.h>

Inheritance diagram for esphome::sx1509::SX1509Component:
esphome::Component esphome::i2c::I2CDevice

Public Member Functions

 SX1509Component ()=default
 
void setup () override
 
void dump_config () override
 
float get_setup_priority () const override
 
void loop () override
 
bool digital_read (uint8_t pin)
 
uint16_t read_key_data ()
 
void set_pin_value (uint8_t pin, uint8_t i_on)
 
void pin_mode (uint8_t pin, gpio::Flags flags)
 
void digital_write (uint8_t pin, bool bit_value)
 
uint32_t get_clock ()
 
void set_rows_cols (uint8_t rows, uint8_t cols)
 
void set_sleep_time (uint16_t sleep_time)
 
void set_scan_time (uint8_t scan_time)
 
void set_debounce_time (uint8_t debounce_time=1)
 
void register_keypad_binary_sensor (SX1509Processor *binary_sensor)
 
void setup_led_driver (uint8_t pin)
 
- Public Member Functions inherited from esphome::Component
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed ()
 
bool is_ready ()
 
virtual bool can_proceed ()
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 
- Public Member Functions inherited from esphome::i2c::I2CDevice
 I2CDevice ()=default
 we use the C++ default constructor More...
 
void set_i2c_address (uint8_t address)
 We store the address of the device on the bus. More...
 
void set_i2c_bus (I2CBus *bus)
 we store the pointer to the I2CBus to use More...
 
I2CRegister reg (uint8_t a_register)
 calls the I2CRegister constructor More...
 
I2CRegister16 reg16 (uint16_t a_register)
 calls the I2CRegister16 constructor More...
 
ErrorCode read (uint8_t *data, size_t len)
 reads an array of bytes from the device using an I2CBus More...
 
ErrorCode read_register (uint8_t a_register, uint8_t *data, size_t len, bool stop=true)
 reads an array of bytes from a specific register in the I²C device More...
 
ErrorCode read_register16 (uint16_t a_register, uint8_t *data, size_t len, bool stop=true)
 reads an array of bytes from a specific register in the I²C device More...
 
ErrorCode write (const uint8_t *data, size_t len, bool stop=true)
 writes an array of bytes to a device using an I2CBus More...
 
ErrorCode write_register (uint8_t a_register, const uint8_t *data, size_t len, bool stop=true)
 writes an array of bytes to a specific register in the I²C device More...
 
ErrorCode write_register16 (uint16_t a_register, const uint8_t *data, size_t len, bool stop=true)
 write an array of bytes to a specific register in the I²C device More...
 
bool read_bytes (uint8_t a_register, uint8_t *data, uint8_t len)
 Compat APIs All methods below have been added for compatibility reasons. More...
 
bool read_bytes_raw (uint8_t *data, uint8_t len)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_bytes (uint8_t a_register)
 
template<size_t N>
optional< std::array< uint8_t, N > > read_bytes_raw ()
 
bool read_bytes_16 (uint8_t a_register, uint16_t *data, uint8_t len)
 
bool read_byte (uint8_t a_register, uint8_t *data, bool stop=true)
 
optional< uint8_t > read_byte (uint8_t a_register)
 
bool read_byte_16 (uint8_t a_register, uint16_t *data)
 
bool write_bytes (uint8_t a_register, const uint8_t *data, uint8_t len, bool stop=true)
 
bool write_bytes (uint8_t a_register, const std::vector< uint8_t > &data)
 
template<size_t N>
bool write_bytes (uint8_t a_register, const std::array< uint8_t, N > &data)
 
bool write_bytes_16 (uint8_t a_register, const uint16_t *data, uint8_t len)
 
bool write_byte (uint8_t a_register, uint8_t data, bool stop=true)
 
bool write_byte_16 (uint8_t a_register, uint16_t data)
 

Protected Member Functions

void setup_keypad_ ()
 
void set_debounce_config_ (uint8_t config_value)
 
void set_debounce_time_ (uint8_t time)
 
void set_debounce_pin_ (uint8_t pin)
 
void set_debounce_enable_ (uint8_t pin)
 
void set_debounce_keypad_ (uint8_t time, uint8_t num_rows, uint8_t num_cols)
 
void clock_ (uint8_t osc_source=2, uint8_t osc_pin_function=1, uint8_t osc_freq_out=0, uint8_t osc_divider=0)
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_setup ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 

Protected Attributes

uint32_t clk_x_ = 2000000
 
uint8_t frequency_ = 0
 
uint16_t ddr_mask_ = 0x00
 
uint16_t input_mask_ = 0x00
 
uint16_t port_mask_ = 0x00
 
uint16_t output_state_ = 0x00
 
bool has_keypad_ = false
 
uint8_t rows_ = 0
 
uint8_t cols_ = 0
 
uint16_t sleep_time_ = 128
 
uint8_t scan_time_ = 1
 
uint8_t debounce_time_ = 1
 
std::vector< SX1509Processor * > keypad_binary_sensors_
 
uint32_t last_loop_timestamp_ = 0
 
const uint32_t min_loop_period_ = 15
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 
- Protected Attributes inherited from esphome::i2c::I2CDevice
uint8_t address_ {0x00}
 store the address of the device on the bus More...
 
I2CBusbus_ {nullptr}
 pointer to I2CBus instance More...
 

Detailed Description

Definition at line 30 of file sx1509.h.

Constructor & Destructor Documentation

◆ SX1509Component()

esphome::sx1509::SX1509Component::SX1509Component ( )
default

Member Function Documentation

◆ clock_()

void esphome::sx1509::SX1509Component::clock_ ( uint8_t  osc_source = 2,
uint8_t  osc_pin_function = 1,
uint8_t  osc_freq_out = 0,
uint8_t  osc_divider = 0 
)
protected

Definition at line 150 of file sx1509.cpp.

◆ digital_read()

bool esphome::sx1509::SX1509Component::digital_read ( uint8_t  pin)

Definition at line 54 of file sx1509.cpp.

◆ digital_write()

void esphome::sx1509::SX1509Component::digital_write ( uint8_t  pin,
bool  bit_value 
)

Definition at line 65 of file sx1509.cpp.

◆ dump_config()

void esphome::sx1509::SX1509Component::dump_config ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 35 of file sx1509.cpp.

◆ get_clock()

uint32_t esphome::sx1509::SX1509Component::get_clock ( )
inline

Definition at line 44 of file sx1509.h.

◆ get_setup_priority()

float esphome::sx1509::SX1509Component::get_setup_priority ( ) const
inlineoverridevirtual

Reimplemented from esphome::Component.

Definition at line 36 of file sx1509.h.

◆ loop()

void esphome::sx1509::SX1509Component::loop ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 43 of file sx1509.cpp.

◆ pin_mode()

void esphome::sx1509::SX1509Component::pin_mode ( uint8_t  pin,
gpio::Flags  flags 
)

Definition at line 88 of file sx1509.cpp.

◆ read_key_data()

uint16_t esphome::sx1509::SX1509Component::read_key_data ( )

Definition at line 208 of file sx1509.cpp.

◆ register_keypad_binary_sensor()

void esphome::sx1509::SX1509Component::register_keypad_binary_sensor ( SX1509Processor binary_sensor)
inline

Definition at line 53 of file sx1509.h.

◆ set_debounce_config_()

void esphome::sx1509::SX1509Component::set_debounce_config_ ( uint8_t  config_value)
protected

Definition at line 214 of file sx1509.cpp.

◆ set_debounce_enable_()

void esphome::sx1509::SX1509Component::set_debounce_enable_ ( uint8_t  pin)
protected

Definition at line 242 of file sx1509.cpp.

◆ set_debounce_keypad_()

void esphome::sx1509::SX1509Component::set_debounce_keypad_ ( uint8_t  time,
uint8_t  num_rows,
uint8_t  num_cols 
)
protected

Definition at line 251 of file sx1509.cpp.

◆ set_debounce_pin_()

void esphome::sx1509::SX1509Component::set_debounce_pin_ ( uint8_t  pin)
protected

Definition at line 249 of file sx1509.cpp.

◆ set_debounce_time()

void esphome::sx1509::SX1509Component::set_debounce_time ( uint8_t  debounce_time = 1)
inline

Definition at line 52 of file sx1509.h.

◆ set_debounce_time_()

void esphome::sx1509::SX1509Component::set_debounce_time_ ( uint8_t  time)
protected

Definition at line 228 of file sx1509.cpp.

◆ set_pin_value()

void esphome::sx1509::SX1509Component::set_pin_value ( uint8_t  pin,
uint8_t  i_on 
)
inline

Definition at line 41 of file sx1509.h.

◆ set_rows_cols()

void esphome::sx1509::SX1509Component::set_rows_cols ( uint8_t  rows,
uint8_t  cols 
)
inline

Definition at line 45 of file sx1509.h.

◆ set_scan_time()

void esphome::sx1509::SX1509Component::set_scan_time ( uint8_t  scan_time)
inline

Definition at line 51 of file sx1509.h.

◆ set_sleep_time()

void esphome::sx1509::SX1509Component::set_sleep_time ( uint16_t  sleep_time)
inline

Definition at line 50 of file sx1509.h.

◆ setup()

void esphome::sx1509::SX1509Component::setup ( )
overridevirtual

Reimplemented from esphome::Component.

Definition at line 10 of file sx1509.cpp.

◆ setup_keypad_()

void esphome::sx1509::SX1509Component::setup_keypad_ ( )
protected

Definition at line 168 of file sx1509.cpp.

◆ setup_led_driver()

void esphome::sx1509::SX1509Component::setup_led_driver ( uint8_t  pin)

Definition at line 118 of file sx1509.cpp.

Field Documentation

◆ clk_x_

uint32_t esphome::sx1509::SX1509Component::clk_x_ = 2000000
protected

Definition at line 59 of file sx1509.h.

◆ cols_

uint8_t esphome::sx1509::SX1509Component::cols_ = 0
protected

Definition at line 67 of file sx1509.h.

◆ ddr_mask_

uint16_t esphome::sx1509::SX1509Component::ddr_mask_ = 0x00
protected

Definition at line 61 of file sx1509.h.

◆ debounce_time_

uint8_t esphome::sx1509::SX1509Component::debounce_time_ = 1
protected

Definition at line 70 of file sx1509.h.

◆ frequency_

uint8_t esphome::sx1509::SX1509Component::frequency_ = 0
protected

Definition at line 60 of file sx1509.h.

◆ has_keypad_

bool esphome::sx1509::SX1509Component::has_keypad_ = false
protected

Definition at line 65 of file sx1509.h.

◆ input_mask_

uint16_t esphome::sx1509::SX1509Component::input_mask_ = 0x00
protected

Definition at line 62 of file sx1509.h.

◆ keypad_binary_sensors_

std::vector<SX1509Processor *> esphome::sx1509::SX1509Component::keypad_binary_sensors_
protected

Definition at line 71 of file sx1509.h.

◆ last_loop_timestamp_

uint32_t esphome::sx1509::SX1509Component::last_loop_timestamp_ = 0
protected

Definition at line 73 of file sx1509.h.

◆ min_loop_period_

const uint32_t esphome::sx1509::SX1509Component::min_loop_period_ = 15
protected

Definition at line 74 of file sx1509.h.

◆ output_state_

uint16_t esphome::sx1509::SX1509Component::output_state_ = 0x00
protected

Definition at line 64 of file sx1509.h.

◆ port_mask_

uint16_t esphome::sx1509::SX1509Component::port_mask_ = 0x00
protected

Definition at line 63 of file sx1509.h.

◆ rows_

uint8_t esphome::sx1509::SX1509Component::rows_ = 0
protected

Definition at line 66 of file sx1509.h.

◆ scan_time_

uint8_t esphome::sx1509::SX1509Component::scan_time_ = 1
protected

Definition at line 69 of file sx1509.h.

◆ sleep_time_

uint16_t esphome::sx1509::SX1509Component::sleep_time_ = 128
protected

Definition at line 68 of file sx1509.h.


The documentation for this class was generated from the following files: