BMP388 / BMP390 Temperature+Pressure Sensor

The bmp3xx sensor platform allows you to use your BMP388 or BMP390 (datasheet, BMP390 product page) temperature and pressure sensors with ESPHome. The I²C bus is required to be set up in your configuration for this sensor to work.

../../_images/bmp388.jpg

BMP388/BMP390 Temperature and Pressure Sensor.

# Example configuration entry
sensor:
  - platform: bmp3xx
    temperature:
      name: "Outside Temperature"
      oversampling: 16x
    pressure:
      name: "Outside Pressure"
    address: 0x77
    update_interval: 60s

Configuration variables:

  • temperature (Optional): The information for the temperature sensor.

    • name (Required, string): The name for the temperature sensor.

    • oversampling (Optional): The oversampling parameter for the temperature sensor. See Oversampling Options.

    • id (Optional, ID): Set the ID of this sensor for use in lambdas.

    • All other options from Sensor.

  • pressure (Optional): The information for the pressure sensor.

    • name (Required, string): The name for the pressure sensor.

    • oversampling (Optional): The oversampling parameter for the temperature sensor. See Oversampling Options.

    • id (Optional, ID): Set the ID of this sensor for use in lambdas.

    • All other options from Sensor.

  • address (Optional, int): Manually specify the I²C address of the sensor. Defaults to 0x77. Another address can be 0x76.

  • iir_filter (Optional): Set up an Infinite Impulse Response filter to increase accuracy. One of OFF, 2x, 4x, 16x, 32, 64x, 128x. Defaults to OFF.

  • update_interval (Optional, Time): The interval to check the sensor. Defaults to 60s.

Oversampling Options

By default, the BMP3xx sensor measures pressure 16 times and temperature 2 times when requesting a new value. You can, however, configure this amount. Possible oversampling values:

  • NONE (value is skipped)

  • 2x

  • 4x

  • 8x

  • 16x (default)

  • 32x

See Also