ESPHome  2024.11.3
Public Member Functions | Protected Member Functions
esphome::daikin::DaikinClimate Class Reference

#include <daikin.h>

Inheritance diagram for esphome::daikin::DaikinClimate:
esphome::climate_ir::ClimateIR esphome::Component esphome::climate::Climate esphome::remote_base::RemoteReceiverListener esphome::remote_base::RemoteTransmittable esphome::EntityBase

Public Member Functions

 DaikinClimate ()
 
- Public Member Functions inherited from esphome::climate_ir::ClimateIR
 ClimateIR (float minimum_temperature, float maximum_temperature, float temperature_step=1.0f, bool supports_dry=false, bool supports_fan_only=false, std::set< climate::ClimateFanMode > fan_modes={}, std::set< climate::ClimateSwingMode > swing_modes={}, std::set< climate::ClimatePreset > presets={})
 
void setup () override
 
void dump_config () override
 
void set_supports_cool (bool supports_cool)
 
void set_supports_heat (bool supports_heat)
 
void set_sensor (sensor::Sensor *sensor)
 
- Public Member Functions inherited from esphome::Component
virtual void loop ()
 This method will be called repeatedly. More...
 
virtual float get_setup_priority () const
 priority of setup(). More...
 
float get_actual_setup_priority () const
 
void set_setup_priority (float priority)
 
virtual float get_loop_priority () const
 priority of loop(). More...
 
void call ()
 
virtual void on_shutdown ()
 
virtual void on_safe_shutdown ()
 
uint32_t get_component_state () const
 
virtual void mark_failed ()
 Mark this component as failed. More...
 
bool is_failed () const
 
bool is_ready () const
 
virtual bool can_proceed ()
 
bool status_has_warning () const
 
bool status_has_error () const
 
void status_set_warning (const char *message="unspecified")
 
void status_set_error (const char *message="unspecified")
 
void status_clear_warning ()
 
void status_clear_error ()
 
void status_momentary_warning (const std::string &name, uint32_t length=5000)
 
void status_momentary_error (const std::string &name, uint32_t length=5000)
 
bool has_overridden_loop () const
 
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
 
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
 
- Public Member Functions inherited from esphome::climate::Climate
 Climate ()
 
void add_on_state_callback (std::function< void(Climate &)> &&callback)
 Add a callback for the climate device state, each time the state of the climate device is updated (using publish_state), this callback will be called. More...
 
void add_on_control_callback (std::function< void(ClimateCall &)> &&callback)
 Add a callback for the climate device configuration; each time the configuration parameters of a climate device is updated (using perform() of a ClimateCall), this callback will be called, before any on_state callback. More...
 
ClimateCall make_call ()
 Make a climate device control call, this is used to control the climate device, see the ClimateCall description for more info. More...
 
void publish_state ()
 Publish the state of the climate device, to be called from integrations. More...
 
ClimateTraits get_traits ()
 Get the traits of this climate device with all overrides applied. More...
 
void set_visual_min_temperature_override (float visual_min_temperature_override)
 
void set_visual_max_temperature_override (float visual_max_temperature_override)
 
void set_visual_temperature_step_override (float target, float current)
 
void set_visual_min_humidity_override (float visual_min_humidity_override)
 
void set_visual_max_humidity_override (float visual_max_humidity_override)
 
- Public Member Functions inherited from esphome::EntityBase
const StringRefget_name () const
 
void set_name (const char *name)
 
bool has_own_name () const
 
std::string get_object_id () const
 
void set_object_id (const char *object_id)
 
uint32_t get_object_id_hash ()
 
bool is_internal () const
 
void set_internal (bool internal)
 
bool is_disabled_by_default () const
 
void set_disabled_by_default (bool disabled_by_default)
 
EntityCategory get_entity_category () const
 
void set_entity_category (EntityCategory entity_category)
 
std::string get_icon () const
 
void set_icon (const char *icon)
 
- Public Member Functions inherited from esphome::remote_base::RemoteTransmittable
 RemoteTransmittable ()
 
 RemoteTransmittable (RemoteTransmitterBase *transmitter)
 
void set_transmitter (RemoteTransmitterBase *transmitter)
 

Protected Member Functions

void transmit_state () override
 
uint8_t operation_mode_ ()
 
uint16_t fan_speed_ ()
 
uint8_t temperature_ ()
 
bool on_receive (remote_base::RemoteReceiveData data) override
 
bool parse_state_frame_ (const uint8_t frame[])
 
- Protected Member Functions inherited from esphome::climate_ir::ClimateIR
void control (const climate::ClimateCall &call) override
 Override control to change settings of the climate device. More...
 
climate::ClimateTraits traits () override
 Return the traits of this controller. More...
 
- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
 
virtual void call_setup ()
 
virtual void call_dump_config ()
 
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
 
void set_interval (uint32_t interval, std::function< void()> &&f)
 
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
 
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
 
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
 
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
 
void set_timeout (uint32_t timeout, std::function< void()> &&f)
 
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
 
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
 
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
 
- Protected Member Functions inherited from esphome::climate::Climate
bool set_fan_mode_ (ClimateFanMode mode)
 Set fan mode. Reset custom fan mode. Return true if fan mode has been changed. More...
 
bool set_custom_fan_mode_ (const std::string &mode)
 Set custom fan mode. Reset primary fan mode. Return true if fan mode has been changed. More...
 
bool set_preset_ (ClimatePreset preset)
 Set preset. Reset custom preset. Return true if preset has been changed. More...
 
bool set_custom_preset_ (const std::string &preset)
 Set custom preset. Reset primary preset. Return true if preset has been changed. More...
 
optional< ClimateDeviceRestoreStaterestore_state_ ()
 Restore the state of the climate device, call this from your setup() method. More...
 
void save_state_ ()
 Internal method to save the state of the climate device to recover memory. More...
 
void dump_traits_ (const char *tag)
 
- Protected Member Functions inherited from esphome::EntityBase
virtual uint32_t hash_base ()
 The hash_base() function has been deprecated. More...
 
void calc_object_id_ ()
 
- Protected Member Functions inherited from esphome::remote_base::RemoteTransmittable
template<typename Protocol >
void transmit_ (const typename Protocol::ProtocolData &data, uint32_t send_times=1, uint32_t send_wait=0)
 

Additional Inherited Members

- Data Fields inherited from esphome::climate::Climate
ClimateMode mode {CLIMATE_MODE_OFF}
 The active mode of the climate device. More...
 
ClimateAction action {CLIMATE_ACTION_OFF}
 The active state of the climate device. More...
 
float current_temperature {NAN}
 The current temperature of the climate device, as reported from the integration. More...
 
float current_humidity {NAN}
 The current humidity of the climate device, as reported from the integration. More...
 
union {
   float   target_temperature
 The target temperature of the climate device. More...
 
   struct {
      float   target_temperature_low {NAN}
 The minimum target temperature of the climate device, for climate devices with split target temperature. More...
 
      float   target_temperature_high {NAN}
 The maximum target temperature of the climate device, for climate devices with split target temperature. More...
 
   } 
 
}; 
 
float target_humidity
 The target humidity of the climate device. More...
 
optional< ClimateFanModefan_mode
 The active fan mode of the climate device. More...
 
ClimateSwingMode swing_mode
 The active swing mode of the climate device. More...
 
optional< std::string > custom_fan_mode
 The active custom fan mode of the climate device. More...
 
optional< ClimatePresetpreset
 The active preset of the climate device. More...
 
optional< std::string > custom_preset
 The active custom preset mode of the climate device. More...
 
- Protected Attributes inherited from esphome::climate_ir::ClimateIR
float minimum_temperature_
 
float maximum_temperature_
 
float temperature_step_
 
bool supports_cool_ {true}
 
bool supports_heat_ {true}
 
bool supports_dry_ {false}
 
bool supports_fan_only_ {false}
 
std::set< climate::ClimateFanModefan_modes_ = {}
 
std::set< climate::ClimateSwingModeswing_modes_ = {}
 
std::set< climate::ClimatePresetpresets_ = {}
 
sensor::Sensorsensor_ {nullptr}
 
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
 
float setup_priority_override_ {NAN}
 
const char * component_source_ {nullptr}
 
- Protected Attributes inherited from esphome::climate::Climate
friend ClimateCall
 
CallbackManager< void(Climate &)> state_callback_ {}
 
CallbackManager< void(ClimateCall &)> control_callback_ {}
 
ESPPreferenceObject rtc_
 
optional< float > visual_min_temperature_override_ {}
 
optional< float > visual_max_temperature_override_ {}
 
optional< float > visual_target_temperature_step_override_ {}
 
optional< float > visual_current_temperature_step_override_ {}
 
optional< float > visual_min_humidity_override_ {}
 
optional< float > visual_max_humidity_override_ {}
 
- Protected Attributes inherited from esphome::EntityBase
StringRef name_
 
const char * object_id_c_str_ {nullptr}
 
const char * icon_c_str_ {nullptr}
 
uint32_t object_id_hash_
 
bool has_own_name_ {false}
 
bool internal_ {false}
 
bool disabled_by_default_ {false}
 
EntityCategory entity_category_ {ENTITY_CATEGORY_NONE}
 
- Protected Attributes inherited from esphome::remote_base::RemoteTransmittable
RemoteTransmitterBasetransmitter_
 

Detailed Description

Definition at line 43 of file daikin.h.

Constructor & Destructor Documentation

◆ DaikinClimate()

esphome::daikin::DaikinClimate::DaikinClimate ( )
inline

Definition at line 45 of file daikin.h.

Member Function Documentation

◆ fan_speed_()

uint16_t esphome::daikin::DaikinClimate::fan_speed_ ( )
protected

Definition at line 95 of file daikin.cpp.

◆ on_receive()

bool esphome::daikin::DaikinClimate::on_receive ( remote_base::RemoteReceiveData  data)
overrideprotectedvirtual

Reimplemented from esphome::climate_ir::ClimateIR.

Definition at line 208 of file daikin.cpp.

◆ operation_mode_()

uint8_t esphome::daikin::DaikinClimate::operation_mode_ ( )
protected

Definition at line 68 of file daikin.cpp.

◆ parse_state_frame_()

bool esphome::daikin::DaikinClimate::parse_state_frame_ ( const uint8_t  frame[])
protected

Definition at line 143 of file daikin.cpp.

◆ temperature_()

uint8_t esphome::daikin::DaikinClimate::temperature_ ( )
protected

Definition at line 129 of file daikin.cpp.

◆ transmit_state()

void esphome::daikin::DaikinClimate::transmit_state ( )
overrideprotectedvirtual

Implements esphome::climate_ir::ClimateIR.

Definition at line 9 of file daikin.cpp.


The documentation for this class was generated from the following files: