ESPHome  2024.6.1
Public Member Functions
esphome::selec_meter::SelecMeter Class Reference

#include <selec_meter.h>

Inheritance diagram for esphome::selec_meter::SelecMeter:
esphome::PollingComponent esphome::modbus::ModbusDevice esphome::Component

Public Member Functions

 SELEC_METER_SENSOR (total_active_energy) SELEC_METER_SENSOR(import_active_energy) SELEC_METER_SENSOR(export_active_energy) SELEC_METER_SENSOR(total_reactive_energy) SELEC_METER_SENSOR(import_reactive_energy) SELEC_METER_SENSOR(export_reactive_energy) SELEC_METER_SENSOR(apparent_energy) SELEC_METER_SENSOR(active_power) SELEC_METER_SENSOR(reactive_power) SELEC_METER_SENSOR(apparent_power) SELEC_METER_SENSOR(voltage) SELEC_METER_SENSOR(current) SELEC_METER_SENSOR(power_factor) SELEC_METER_SENSOR(frequency) SELEC_METER_SENSOR(maximum_demand_active_power) SELEC_METER_SENSOR(maximum_demand_reactive_power) SELEC_METER_SENSOR(maximum_demand_apparent_power) void update() override
void on_modbus_data (const std::vector< uint8_t > &data) override
void dump_config () override
- Public Member Functions inherited from esphome::PollingComponent
 PollingComponent ()
 PollingComponent (uint32_t update_interval)
 Initialize this polling component with the given update interval in ms. More...
virtual void set_update_interval (uint32_t update_interval)
 Manually set the update interval in ms for this polling object. More...
virtual void update ()=0
void call_setup () override
virtual uint32_t get_update_interval () const
 Get the update interval in ms of this sensor. More...
void start_poller ()
void stop_poller ()
- Public Member Functions inherited from esphome::Component
virtual void setup ()
 Where the component's initialization should happen. More...
virtual void loop ()
 This method will be called repeatedly. More...
virtual float get_setup_priority () const
 priority of setup(). More...
float get_actual_setup_priority () const
void set_setup_priority (float priority)
virtual float get_loop_priority () const
 priority of loop(). More...
void call ()
virtual void on_shutdown ()
virtual void on_safe_shutdown ()
uint32_t get_component_state () const
virtual void mark_failed ()
 Mark this component as failed. More...
bool is_failed () const
bool is_ready () const
virtual bool can_proceed ()
bool status_has_warning () const
bool status_has_error () const
void status_set_warning (const char *message="unspecified")
void status_set_error (const char *message="unspecified")
void status_clear_warning ()
void status_clear_error ()
void status_momentary_warning (const std::string &name, uint32_t length=5000)
void status_momentary_error (const std::string &name, uint32_t length=5000)
bool has_overridden_loop () const
void set_component_source (const char *source)
 Set where this component was loaded from for some debug messages. More...
const char * get_component_source () const
 Get the integration where this component was declared as a string. More...
- Public Member Functions inherited from esphome::modbus::ModbusDevice
void set_parent (Modbus *parent)
void set_address (uint8_t address)
virtual void on_modbus_error (uint8_t function_code, uint8_t exception_code)
virtual void on_modbus_read_registers (uint8_t function_code, uint16_t start_address, uint16_t number_of_registers)
void send (uint8_t function, uint16_t start_address, uint16_t number_of_entities, uint8_t payload_len=0, const uint8_t *payload=nullptr)
void send_raw (const std::vector< uint8_t > &payload)
bool waiting_for_response ()

Additional Inherited Members

- Protected Member Functions inherited from esphome::Component
virtual void call_loop ()
virtual void call_dump_config ()
void set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
 Set an interval function with a unique name. More...
void set_interval (uint32_t interval, std::function< void()> &&f)
bool cancel_interval (const std::string &name)
 Cancel an interval function. More...
void set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
 Set an retry function with a unique name. More...
void set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
bool cancel_retry (const std::string &name)
 Cancel a retry function. More...
void set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
 Set a timeout function with a unique name. More...
void set_timeout (uint32_t timeout, std::function< void()> &&f)
bool cancel_timeout (const std::string &name)
 Cancel a timeout function. More...
void defer (const std::string &name, std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
void defer (std::function< void()> &&f)
 Defer a callback to the next loop() call. More...
bool cancel_defer (const std::string &name)
 Cancel a defer callback using the specified name, name must not be empty. More...
- Protected Attributes inherited from esphome::PollingComponent
uint32_t update_interval_
- Protected Attributes inherited from esphome::Component
uint32_t component_state_ {0x0000}
 State of this component. More...
float setup_priority_override_ {NAN}
const char * component_source_ {nullptr}
- Protected Attributes inherited from esphome::modbus::ModbusDevice
friend Modbus
uint8_t address_

Detailed Description

Definition at line 19 of file selec_meter.h.

Member Function Documentation

◆ dump_config()

void esphome::selec_meter::SelecMeter::dump_config ( )

Reimplemented from esphome::Component.

Definition at line 85 of file selec_meter.cpp.

◆ on_modbus_data()

void esphome::selec_meter::SelecMeter::on_modbus_data ( const std::vector< uint8_t > &  data)

Implements esphome::modbus::ModbusDevice.

Definition at line 13 of file selec_meter.cpp.


esphome::selec_meter::SelecMeter::SELEC_METER_SENSOR ( total_active_energy  )

The documentation for this class was generated from the following files: