#include <tuya_climate.h>

Inheritance diagram for esphome::tuya::TuyaClimate:

Public Member Functions
void	setup () override

void	loop () override

void	dump_config () override

void	set_supports_heat (bool supports_heat)

void	set_supports_cool (bool supports_cool)

void	set_switch_id (uint8_t switch_id)

void	set_active_state_id (uint8_t state_id)

void	set_active_state_heating_value (uint8_t value)

void	set_active_state_cooling_value (uint8_t value)

void	set_active_state_drying_value (uint8_t value)

void	set_active_state_fanonly_value (uint8_t value)

void	set_heating_state_pin (GPIOPin *pin)

void	set_cooling_state_pin (GPIOPin *pin)

void	set_swing_vertical_id (uint8_t swing_vertical_id)

void	set_swing_horizontal_id (uint8_t swing_horizontal_id)

void	set_fan_speed_id (uint8_t fan_speed_id)

void	set_fan_speed_low_value (uint8_t fan_speed_low_value)

void	set_fan_speed_medium_value (uint8_t fan_speed_medium_value)

void	set_fan_speed_middle_value (uint8_t fan_speed_middle_value)

void	set_fan_speed_high_value (uint8_t fan_speed_high_value)

void	set_fan_speed_auto_value (uint8_t fan_speed_auto_value)

void	set_target_temperature_id (uint8_t target_temperature_id)

void	set_current_temperature_id (uint8_t current_temperature_id)

void	set_current_temperature_multiplier (float temperature_multiplier)

void	set_target_temperature_multiplier (float temperature_multiplier)

void	set_eco_id (uint8_t eco_id)

void	set_eco_temperature (float eco_temperature)

void	set_sleep_id (uint8_t sleep_id)

void	set_reports_fahrenheit ()

void	set_tuya_parent (Tuya *parent)

Public Member Functions inherited from esphome::climate::Climate
	Climate ()

void	add_on_state_callback (std::function< void(Climate &)> &&callback)
	Add a callback for the climate device state, each time the state of the climate device is updated (using publish_state), this callback will be called. More...

void	add_on_control_callback (std::function< void(ClimateCall &)> &&callback)
	Add a callback for the climate device configuration; each time the configuration parameters of a climate device is updated (using perform() of a ClimateCall), this callback will be called, before any on_state callback. More...

ClimateCall	make_call ()
	Make a climate device control call, this is used to control the climate device, see the ClimateCall description for more info. More...

void	publish_state ()
	Publish the state of the climate device, to be called from integrations. More...

ClimateTraits	get_traits ()
	Get the traits of this climate device with all overrides applied. More...

void	set_visual_min_temperature_override (float visual_min_temperature_override)

void	set_visual_max_temperature_override (float visual_max_temperature_override)

void	set_visual_temperature_step_override (float target, float current)

void	set_visual_min_humidity_override (float visual_min_humidity_override)

void	set_visual_max_humidity_override (float visual_max_humidity_override)

Public Member Functions inherited from esphome::EntityBase
const StringRef &	get_name () const

void	set_name (const char *name)

bool	has_own_name () const

std::string	get_object_id () const

void	set_object_id (const char *object_id)

uint32_t	get_object_id_hash ()

bool	is_internal () const

void	set_internal (bool internal)

bool	is_disabled_by_default () const

void	set_disabled_by_default (bool disabled_by_default)

EntityCategory	get_entity_category () const

void	set_entity_category (EntityCategory entity_category)

std::string	get_icon () const

void	set_icon (const char *icon)

Public Member Functions inherited from esphome::Component
virtual float	get_setup_priority () const
	priority of setup(). More...

float	get_actual_setup_priority () const

void	set_setup_priority (float priority)

virtual float	get_loop_priority () const
	priority of loop(). More...

void	call ()

virtual void	on_shutdown ()

virtual void	on_safe_shutdown ()

uint32_t	get_component_state () const

virtual void	mark_failed ()
	Mark this component as failed. More...

bool	is_failed ()

bool	is_ready ()

virtual bool	can_proceed ()

bool	status_has_warning () const

bool	status_has_error () const

void	status_set_warning (const char *message="unspecified")

void	status_set_error (const char *message="unspecified")

void	status_clear_warning ()

void	status_clear_error ()

void	status_momentary_warning (const std::string &name, uint32_t length=5000)

void	status_momentary_error (const std::string &name, uint32_t length=5000)

bool	has_overridden_loop () const

void	set_component_source (const char *source)
	Set where this component was loaded from for some debug messages. More...

const char *	get_component_source () const
	Get the integration where this component was declared as a string. More...

Protected Member Functions
void	control (const climate::ClimateCall &call) override
	Override control to change settings of the climate device. More...

void	control_swing_mode_ (const climate::ClimateCall &call)
	Override control to change settings of swing mode. More...

void	control_fan_mode_ (const climate::ClimateCall &call)
	Override control to change settings of fan mode. More...

climate::ClimateTraits	traits () override
	Return the traits of this controller. More...

void	compute_preset_ ()
	Re-compute the active preset of this climate controller. More...

void	compute_target_temperature_ ()
	Re-compute the target temperature of this climate controller. More...

void	compute_state_ ()
	Re-compute the state of this climate controller. More...

void	compute_swingmode_ ()
	Re-Compute the swing mode of this climate controller. More...

void	compute_fanmode_ ()
	Re-Compute the fan mode of this climate controller. More...

void	switch_to_action_ (climate::ClimateAction action)
	Switch the climate device to the given climate mode. More...

Protected Member Functions inherited from esphome::climate::Climate
bool	set_fan_mode_ (ClimateFanMode mode)
	Set fan mode. Reset custom fan mode. Return true if fan mode has been changed. More...

bool	set_custom_fan_mode_ (const std::string &mode)
	Set custom fan mode. Reset primary fan mode. Return true if fan mode has been changed. More...

bool	set_preset_ (ClimatePreset preset)
	Set preset. Reset custom preset. Return true if preset has been changed. More...

bool	set_custom_preset_ (const std::string &preset)
	Set custom preset. Reset primary preset. Return true if preset has been changed. More...

optional< ClimateDeviceRestoreState >	restore_state_ ()
	Restore the state of the climate device, call this from your setup() method. More...

void	save_state_ ()
	Internal method to save the state of the climate device to recover memory. More...

void	dump_traits_ (const char *tag)

Protected Member Functions inherited from esphome::EntityBase
virtual uint32_t	hash_base ()
	The hash_base() function has been deprecated. More...

void	calc_object_id_ ()

Protected Member Functions inherited from esphome::Component
virtual void	call_loop ()

virtual void	call_setup ()

virtual void	call_dump_config ()

void	set_interval (const std::string &name, uint32_t interval, std::function< void()> &&f)
	Set an interval function with a unique name. More...

void	set_interval (uint32_t interval, std::function< void()> &&f)

bool	cancel_interval (const std::string &name)
	Cancel an interval function. More...

void	set_retry (const std::string &name, uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)
	Set an retry function with a unique name. More...

void	set_retry (uint32_t initial_wait_time, uint8_t max_attempts, std::function< RetryResult(uint8_t)> &&f, float backoff_increase_factor=1.0f)

bool	cancel_retry (const std::string &name)
	Cancel a retry function. More...

void	set_timeout (const std::string &name, uint32_t timeout, std::function< void()> &&f)
	Set a timeout function with a unique name. More...

void	set_timeout (uint32_t timeout, std::function< void()> &&f)

bool	cancel_timeout (const std::string &name)
	Cancel a timeout function. More...

void	defer (const std::string &name, std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

void	defer (std::function< void()> &&f)
	Defer a callback to the next loop() call. More...

bool	cancel_defer (const std::string &name)
	Cancel a defer callback using the specified name, name must not be empty. More...

Protected Attributes
Tuya *	parent_

bool	supports_heat_

bool	supports_cool_

optional< uint8_t >	switch_id_ {}

optional< uint8_t >	active_state_id_ {}

optional< uint8_t >	active_state_heating_value_ {}

optional< uint8_t >	active_state_cooling_value_ {}

optional< uint8_t >	active_state_drying_value_ {}

optional< uint8_t >	active_state_fanonly_value_ {}

GPIOPin *	heating_state_pin_ {nullptr}

GPIOPin *	cooling_state_pin_ {nullptr}

optional< uint8_t >	target_temperature_id_ {}

optional< uint8_t >	current_temperature_id_ {}

float	current_temperature_multiplier_ {1.0f}

float	target_temperature_multiplier_ {1.0f}

float	hysteresis_ {1.0f}

optional< uint8_t >	eco_id_ {}

optional< uint8_t >	sleep_id_ {}

optional< float >	eco_temperature_ {}

uint8_t	active_state_

uint8_t	fan_state_

optional< uint8_t >	swing_vertical_id_ {}

optional< uint8_t >	swing_horizontal_id_ {}

optional< uint8_t >	fan_speed_id_ {}

optional< uint8_t >	fan_speed_low_value_ {}

optional< uint8_t >	fan_speed_medium_value_ {}

optional< uint8_t >	fan_speed_middle_value_ {}

optional< uint8_t >	fan_speed_high_value_ {}

optional< uint8_t >	fan_speed_auto_value_ {}

bool	swing_vertical_ {false}

bool	swing_horizontal_ {false}

bool	heating_state_ {false}

bool	cooling_state_ {false}

float	manual_temperature_

bool	eco_

bool	sleep_

bool	reports_fahrenheit_ {false}

Protected Attributes inherited from esphome::climate::Climate
friend	ClimateCall

CallbackManager< void(Climate &)>	state_callback_ {}

CallbackManager< void(ClimateCall &)>	control_callback_ {}

ESPPreferenceObject	rtc_

optional< float >	visual_min_temperature_override_ {}

optional< float >	visual_max_temperature_override_ {}

optional< float >	visual_target_temperature_step_override_ {}

optional< float >	visual_current_temperature_step_override_ {}

optional< float >	visual_min_humidity_override_ {}

optional< float >	visual_max_humidity_override_ {}

Protected Attributes inherited from esphome::EntityBase
StringRef	name_

const char *	object_id_c_str_ {nullptr}

const char *	icon_c_str_ {nullptr}

uint32_t	object_id_hash_

bool	has_own_name_ {false}

bool	internal_ {false}

bool	disabled_by_default_ {false}

EntityCategory	entity_category_ {ENTITY_CATEGORY_NONE}

Protected Attributes inherited from esphome::Component
uint32_t	component_state_ {0x0000}
	State of this component. More...

float	setup_priority_override_ {NAN}

const char *	component_source_ {nullptr}

Additional Inherited Members
Data Fields inherited from esphome::climate::Climate
ClimateMode	mode {CLIMATE_MODE_OFF}
	The active mode of the climate device. More...

ClimateAction	action {CLIMATE_ACTION_OFF}
	The active state of the climate device. More...

float	current_temperature {NAN}
	The current temperature of the climate device, as reported from the integration. More...

float	current_humidity {NAN}
	The current humidity of the climate device, as reported from the integration. More...

union {
float target_temperature
	The target temperature of the climate device. More...

struct {
float target_temperature_low {NAN}
	The minimum target temperature of the climate device, for climate devices with split target temperature. More...

float target_temperature_high {NAN}
	The maximum target temperature of the climate device, for climate devices with split target temperature. More...

}

};

float	target_humidity
	The target humidity of the climate device. More...

optional< ClimateFanMode >	fan_mode
	The active fan mode of the climate device. More...

ClimateSwingMode	swing_mode
	The active swing mode of the climate device. More...

optional< std::string >	custom_fan_mode
	The active custom fan mode of the climate device. More...

optional< ClimatePreset >	preset
	The active preset of the climate device. More...

optional< std::string >	custom_preset
	The active custom preset mode of the climate device. More...

Detailed Description

Definition at line 10 of file tuya_climate.h.

Member Function Documentation

◆ compute_fanmode_()

void esphome::tuya::TuyaClimate::compute_fanmode_ ( )

protected

Re-Compute the fan mode of this climate controller.

Definition at line 387 of file tuya_climate.cpp.

◆ compute_preset_()

void esphome::tuya::TuyaClimate::compute_preset_ ( )

protected

Re-compute the active preset of this climate controller.

Definition at line 365 of file tuya_climate.cpp.

◆ compute_state_()

void esphome::tuya::TuyaClimate::compute_state_ ( )

protected

Re-compute the state of this climate controller.

Definition at line 412 of file tuya_climate.cpp.

◆ compute_swingmode_()

void esphome::tuya::TuyaClimate::compute_swingmode_ ( )

protected

Re-Compute the swing mode of this climate controller.

Definition at line 375 of file tuya_climate.cpp.

◆ compute_target_temperature_()

void esphome::tuya::TuyaClimate::compute_target_temperature_ ( )

protected

Re-compute the target temperature of this climate controller.

Definition at line 404 of file tuya_climate.cpp.

◆ control()

void esphome::tuya::TuyaClimate::control ( const climate::ClimateCall & call )

overrideprotectedvirtual

Override control to change settings of the climate device.

Implements esphome::climate::Climate.

Definition at line 143 of file tuya_climate.cpp.

◆ control_fan_mode_()

void esphome::tuya::TuyaClimate::control_fan_mode_ ( const climate::ClimateCall & call )

protected

Override control to change settings of fan mode.

Definition at line 252 of file tuya_climate.cpp.

◆ control_swing_mode_()

void esphome::tuya::TuyaClimate::control_swing_mode_ ( const climate::ClimateCall & call )

protected

Override control to change settings of swing mode.

Definition at line 189 of file tuya_climate.cpp.

◆ dump_config()

void esphome::tuya::TuyaClimate::dump_config ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 335 of file tuya_climate.cpp.

◆ loop()

void esphome::tuya::TuyaClimate::loop ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 115 of file tuya_climate.cpp.

◆ set_active_state_cooling_value()

void esphome::tuya::TuyaClimate::set_active_state_cooling_value ( uint8_t value )

inline

Definition at line 20 of file tuya_climate.h.

◆ set_active_state_drying_value()

void esphome::tuya::TuyaClimate::set_active_state_drying_value ( uint8_t value )

inline

Definition at line 21 of file tuya_climate.h.

◆ set_active_state_fanonly_value()

void esphome::tuya::TuyaClimate::set_active_state_fanonly_value ( uint8_t value )

inline

Definition at line 22 of file tuya_climate.h.

◆ set_active_state_heating_value()

void esphome::tuya::TuyaClimate::set_active_state_heating_value ( uint8_t value )

inline

Definition at line 19 of file tuya_climate.h.

◆ set_active_state_id()

void esphome::tuya::TuyaClimate::set_active_state_id ( uint8_t state_id )

inline

Definition at line 18 of file tuya_climate.h.

◆ set_cooling_state_pin()

void esphome::tuya::TuyaClimate::set_cooling_state_pin ( GPIOPin * pin )

inline

Definition at line 24 of file tuya_climate.h.

◆ set_current_temperature_id()

void esphome::tuya::TuyaClimate::set_current_temperature_id ( uint8_t current_temperature_id )

inline

Definition at line 40 of file tuya_climate.h.

◆ set_current_temperature_multiplier()

void esphome::tuya::TuyaClimate::set_current_temperature_multiplier ( float temperature_multiplier )

inline

Definition at line 43 of file tuya_climate.h.

◆ set_eco_id()

void esphome::tuya::TuyaClimate::set_eco_id ( uint8_t eco_id )

inline

Definition at line 49 of file tuya_climate.h.

◆ set_eco_temperature()

void esphome::tuya::TuyaClimate::set_eco_temperature ( float eco_temperature )

inline

Definition at line 50 of file tuya_climate.h.

◆ set_fan_speed_auto_value()

void esphome::tuya::TuyaClimate::set_fan_speed_auto_value ( uint8_t fan_speed_auto_value )

inline

Definition at line 36 of file tuya_climate.h.

◆ set_fan_speed_high_value()

void esphome::tuya::TuyaClimate::set_fan_speed_high_value ( uint8_t fan_speed_high_value )

inline

Definition at line 35 of file tuya_climate.h.

◆ set_fan_speed_id()

void esphome::tuya::TuyaClimate::set_fan_speed_id ( uint8_t fan_speed_id )

inline

Definition at line 27 of file tuya_climate.h.

◆ set_fan_speed_low_value()

void esphome::tuya::TuyaClimate::set_fan_speed_low_value ( uint8_t fan_speed_low_value )

inline

Definition at line 28 of file tuya_climate.h.

◆ set_fan_speed_medium_value()

void esphome::tuya::TuyaClimate::set_fan_speed_medium_value ( uint8_t fan_speed_medium_value )

inline

Definition at line 29 of file tuya_climate.h.

◆ set_fan_speed_middle_value()

void esphome::tuya::TuyaClimate::set_fan_speed_middle_value ( uint8_t fan_speed_middle_value )

inline

Definition at line 32 of file tuya_climate.h.

◆ set_heating_state_pin()

void esphome::tuya::TuyaClimate::set_heating_state_pin ( GPIOPin * pin )

inline

Definition at line 23 of file tuya_climate.h.

◆ set_reports_fahrenheit()

void esphome::tuya::TuyaClimate::set_reports_fahrenheit ( )

inline

Definition at line 53 of file tuya_climate.h.

◆ set_sleep_id()

void esphome::tuya::TuyaClimate::set_sleep_id ( uint8_t sleep_id )

inline

Definition at line 51 of file tuya_climate.h.

◆ set_supports_cool()

void esphome::tuya::TuyaClimate::set_supports_cool ( bool supports_cool )

inline

Definition at line 16 of file tuya_climate.h.

◆ set_supports_heat()

void esphome::tuya::TuyaClimate::set_supports_heat ( bool supports_heat )

inline

Definition at line 15 of file tuya_climate.h.

◆ set_swing_horizontal_id()

void esphome::tuya::TuyaClimate::set_swing_horizontal_id ( uint8_t swing_horizontal_id )

inline

Definition at line 26 of file tuya_climate.h.

◆ set_swing_vertical_id()

void esphome::tuya::TuyaClimate::set_swing_vertical_id ( uint8_t swing_vertical_id )

inline

Definition at line 25 of file tuya_climate.h.

◆ set_switch_id()

void esphome::tuya::TuyaClimate::set_switch_id ( uint8_t switch_id )

inline

Definition at line 17 of file tuya_climate.h.

◆ set_target_temperature_id()

void esphome::tuya::TuyaClimate::set_target_temperature_id ( uint8_t target_temperature_id )

inline

Definition at line 37 of file tuya_climate.h.

◆ set_target_temperature_multiplier()

void esphome::tuya::TuyaClimate::set_target_temperature_multiplier ( float temperature_multiplier )

inline

Definition at line 46 of file tuya_climate.h.

◆ set_tuya_parent()

void esphome::tuya::TuyaClimate::set_tuya_parent ( Tuya * parent )

inline

Definition at line 55 of file tuya_climate.h.

◆ setup()

void esphome::tuya::TuyaClimate::setup ( )

overridevirtual

Reimplemented from esphome::Component.

Definition at line 9 of file tuya_climate.cpp.

◆ switch_to_action_()

void esphome::tuya::TuyaClimate::switch_to_action_ ( climate::ClimateAction action )

protected

Switch the climate device to the given climate mode.

Definition at line 470 of file tuya_climate.cpp.

◆ traits()

climate::ClimateTraits esphome::tuya::TuyaClimate::traits ( )

overrideprotectedvirtual

Return the traits of this controller.

Implements esphome::climate::Climate.

Definition at line 284 of file tuya_climate.cpp.

Field Documentation

◆ active_state_

uint8_t esphome::tuya::TuyaClimate::active_state_

protected

Definition at line 107 of file tuya_climate.h.

◆ active_state_cooling_value_

optional<uint8_t> esphome::tuya::TuyaClimate::active_state_cooling_value_ {}

protected

Definition at line 94 of file tuya_climate.h.

◆ active_state_drying_value_

optional<uint8_t> esphome::tuya::TuyaClimate::active_state_drying_value_ {}

protected

Definition at line 95 of file tuya_climate.h.

◆ active_state_fanonly_value_

optional<uint8_t> esphome::tuya::TuyaClimate::active_state_fanonly_value_ {}

protected

Definition at line 96 of file tuya_climate.h.

◆ active_state_heating_value_

optional<uint8_t> esphome::tuya::TuyaClimate::active_state_heating_value_ {}

protected

Definition at line 93 of file tuya_climate.h.

◆ active_state_id_

optional<uint8_t> esphome::tuya::TuyaClimate::active_state_id_ {}

protected

Definition at line 92 of file tuya_climate.h.

◆ cooling_state_

bool esphome::tuya::TuyaClimate::cooling_state_ {false}

protected

Definition at line 120 of file tuya_climate.h.

◆ cooling_state_pin_

GPIOPin* esphome::tuya::TuyaClimate::cooling_state_pin_ {nullptr}

protected

Definition at line 98 of file tuya_climate.h.

◆ current_temperature_id_

optional<uint8_t> esphome::tuya::TuyaClimate::current_temperature_id_ {}

protected

Definition at line 100 of file tuya_climate.h.

◆ current_temperature_multiplier_

float esphome::tuya::TuyaClimate::current_temperature_multiplier_ {1.0f}

protected

Definition at line 101 of file tuya_climate.h.

◆ eco_

bool esphome::tuya::TuyaClimate::eco_

protected

Definition at line 122 of file tuya_climate.h.

◆ eco_id_

optional<uint8_t> esphome::tuya::TuyaClimate::eco_id_ {}

protected

Definition at line 104 of file tuya_climate.h.

◆ eco_temperature_

optional<float> esphome::tuya::TuyaClimate::eco_temperature_ {}

protected

Definition at line 106 of file tuya_climate.h.

◆ fan_speed_auto_value_

optional<uint8_t> esphome::tuya::TuyaClimate::fan_speed_auto_value_ {}

protected

Definition at line 116 of file tuya_climate.h.

◆ fan_speed_high_value_

optional<uint8_t> esphome::tuya::TuyaClimate::fan_speed_high_value_ {}

protected

Definition at line 115 of file tuya_climate.h.

◆ fan_speed_id_

optional<uint8_t> esphome::tuya::TuyaClimate::fan_speed_id_ {}

protected

Definition at line 111 of file tuya_climate.h.

◆ fan_speed_low_value_

optional<uint8_t> esphome::tuya::TuyaClimate::fan_speed_low_value_ {}

protected

Definition at line 112 of file tuya_climate.h.

◆ fan_speed_medium_value_

optional<uint8_t> esphome::tuya::TuyaClimate::fan_speed_medium_value_ {}

protected

Definition at line 113 of file tuya_climate.h.

◆ fan_speed_middle_value_

optional<uint8_t> esphome::tuya::TuyaClimate::fan_speed_middle_value_ {}

protected

Definition at line 114 of file tuya_climate.h.

◆ fan_state_

uint8_t esphome::tuya::TuyaClimate::fan_state_

protected

Definition at line 108 of file tuya_climate.h.

◆ heating_state_

bool esphome::tuya::TuyaClimate::heating_state_ {false}

protected

Definition at line 119 of file tuya_climate.h.

◆ heating_state_pin_

GPIOPin* esphome::tuya::TuyaClimate::heating_state_pin_ {nullptr}

protected

Definition at line 97 of file tuya_climate.h.

◆ hysteresis_

float esphome::tuya::TuyaClimate::hysteresis_ {1.0f}

protected

Definition at line 103 of file tuya_climate.h.

◆ manual_temperature_

float esphome::tuya::TuyaClimate::manual_temperature_

protected

Definition at line 121 of file tuya_climate.h.

◆ parent_

Tuya* esphome::tuya::TuyaClimate::parent_

protected

Definition at line 88 of file tuya_climate.h.

◆ reports_fahrenheit_

bool esphome::tuya::TuyaClimate::reports_fahrenheit_ {false}

protected

Definition at line 124 of file tuya_climate.h.

◆ sleep_

bool esphome::tuya::TuyaClimate::sleep_

protected

Definition at line 123 of file tuya_climate.h.

◆ sleep_id_

optional<uint8_t> esphome::tuya::TuyaClimate::sleep_id_ {}

protected

Definition at line 105 of file tuya_climate.h.

◆ supports_cool_

bool esphome::tuya::TuyaClimate::supports_cool_

protected

Definition at line 90 of file tuya_climate.h.

◆ supports_heat_

bool esphome::tuya::TuyaClimate::supports_heat_

protected

Definition at line 89 of file tuya_climate.h.

◆ swing_horizontal_

bool esphome::tuya::TuyaClimate::swing_horizontal_ {false}

protected

Definition at line 118 of file tuya_climate.h.

◆ swing_horizontal_id_

optional<uint8_t> esphome::tuya::TuyaClimate::swing_horizontal_id_ {}

protected

Definition at line 110 of file tuya_climate.h.

◆ swing_vertical_

bool esphome::tuya::TuyaClimate::swing_vertical_ {false}

protected

Definition at line 117 of file tuya_climate.h.

◆ swing_vertical_id_

optional<uint8_t> esphome::tuya::TuyaClimate::swing_vertical_id_ {}

protected

Definition at line 109 of file tuya_climate.h.

◆ switch_id_

optional<uint8_t> esphome::tuya::TuyaClimate::switch_id_ {}

protected

Definition at line 91 of file tuya_climate.h.

◆ target_temperature_id_

optional<uint8_t> esphome::tuya::TuyaClimate::target_temperature_id_ {}

protected

Definition at line 99 of file tuya_climate.h.

◆ target_temperature_multiplier_

float esphome::tuya::TuyaClimate::target_temperature_multiplier_ {1.0f}

protected

Definition at line 102 of file tuya_climate.h.

The documentation for this class was generated from the following files:

/opt/build/esphome/esphome/components/tuya/climate/tuya_climate.h
/opt/build/esphome/esphome/components/tuya/climate/tuya_climate.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Function Documentation

◆ compute_fanmode_()

◆ compute_preset_()

◆ compute_state_()

◆ compute_swingmode_()

◆ compute_target_temperature_()

◆ control()

◆ control_fan_mode_()

◆ control_swing_mode_()

◆ dump_config()

◆ loop()

◆ set_active_state_cooling_value()

◆ set_active_state_drying_value()

◆ set_active_state_fanonly_value()

◆ set_active_state_heating_value()

◆ set_active_state_id()

◆ set_cooling_state_pin()

◆ set_current_temperature_id()

◆ set_current_temperature_multiplier()

◆ set_eco_id()

◆ set_eco_temperature()

◆ set_fan_speed_auto_value()

◆ set_fan_speed_high_value()

◆ set_fan_speed_id()

◆ set_fan_speed_low_value()

◆ set_fan_speed_medium_value()

◆ set_fan_speed_middle_value()

◆ set_heating_state_pin()

◆ set_reports_fahrenheit()

◆ set_sleep_id()

◆ set_supports_cool()

◆ set_supports_heat()

◆ set_swing_horizontal_id()

◆ set_swing_vertical_id()

◆ set_switch_id()

◆ set_target_temperature_id()

◆ set_target_temperature_multiplier()

◆ set_tuya_parent()

◆ setup()

◆ switch_to_action_()

◆ traits()

Field Documentation

◆ active_state_

◆ active_state_cooling_value_

◆ active_state_drying_value_

◆ active_state_fanonly_value_

◆ active_state_heating_value_

◆ active_state_id_

◆ cooling_state_

◆ cooling_state_pin_

◆ current_temperature_id_

◆ current_temperature_multiplier_

◆ eco_

◆ eco_id_

◆ eco_temperature_

◆ fan_speed_auto_value_

◆ fan_speed_high_value_

◆ fan_speed_id_

◆ fan_speed_low_value_

◆ fan_speed_medium_value_

◆ fan_speed_middle_value_

◆ fan_state_

◆ heating_state_

◆ heating_state_pin_

◆ hysteresis_

◆ manual_temperature_

◆ parent_

◆ reports_fahrenheit_

◆ sleep_

◆ sleep_id_

◆ supports_cool_

◆ supports_heat_

◆ swing_horizontal_

◆ swing_horizontal_id_

◆ swing_vertical_